Printable View
All right I have a problem. I bought a 360 off of wal-mart's website and when i took it out I noticed on the metal part of the HD where it says HDD had several scratches on it. My first that was these rat bastards sold me a used hardrive. So I took it to my local wal-mart and exchanged it. When I took my new 360 out I noticed the scatches again. I don't know if Wal-Mart is full of assmanauts or this is common among all 360s. Im thinking of calling BestBuy and asking for some help on the 26th.
When i had mine i can't remember any scratches or anything, ohh i nevver had a HD though, hmm never heard of anything like it though.
Did you take the plastic off of the side?
You may be seeing a reflection from the plastic...instead of actual scratches.
maybe you just have really rough skin
Yeah lol there was a sticker, a near fucking invisible sticker! Anyway I still have another problem! :( When I try to get on to Xbox Live the connection test is fine but when it searches for an IP adress it fails. I have my 360 connected directly to my computer.
Plug the Ethernet Cable directly into your source, that will show you if its the 360 or your connection, if it works jsut read some stuff about connecting it through your PC.
You have to set it up through your Pc i think, you cant just plug it in and WOO you're off.
Well fuck thats what I wanted. Anyone know where I can find some information about setting it up when its connected directly to your PC?
Ill have a look for you now
Go to Network Connections and Start a Home or small office network and set ur xbox connection to share the PCs internet connection.
So you have a couple of options - setup ICS to share the connection on your PC, then connect 360->PC with a cross-over ethernet cable; or buy a cheap ethernet hub, and a second ethernet cable (to connect the PC to the hub) then plug the 360 into the hub. I used to run Live on my XB using ICS and never had a single problem.
You enable bridging by opening Network Connections, selecting
the two adapters you want to bridge, right click and select Bridge Connections.
From that i think you just have to set up a new network, should be easy
Im in the shoutbox if you need help ;)
There is also a bitof info near the bottom of this thread http://forumz.tomshardware.com/commu...10.html#386694
Sounds good. I'll have a look at it a little later. I appreaciate it.l :cool:
Hmm I dunno what im doing or what im doing wrong. I set up that sharing thing like you said but nothing happend. Im not sure what two connections I need to bridge, I have 3. And I assume the cable that came in the box is a crossover cable. Ben do you have AIM?
Nope just MSN.
Hmm im not sure but try doing it this way.
1. Plug the Ethernet Cable from the 360 into your PC
2. Get to the Network Connections Screen, and choose 'Network Setup Wizard'
3. And then follow the steps/instructions, i cant go any further because i sold my 360 =(
Live is down atm, no?
Don't have a clue, the site is not down
aparantly the live servers crashed boxing day?
I got it to work following these intstructions; Im not sure its the most secure or only way to do it but it worked :)
Quote:
Plug your 360 to your PC NiC (ethernet port) using the supplies ethernet cable, flip on your PC, flip on your 360, go to >Start>Control Panel>Network Connections>Wireless Network Connection>(right click it)>(select properties)>click the advanced tab> check "allow other users to connect through this computer's internet connection>click ok
Woop good good :)
Don't people ever read manuals anymore? :O :P
Nope
the rule is, when you buy a new piece of technology, you THROW THE MANUAL OUT THE WINDOW!
I did read it :) It did not help.
I don't throw the manual out the window, just back in the box.
I was having the same problem for about 10 minutes. I had a wireless network adapter connected to my 360 and it worked fine on a non HDTV but on the LCD it didn't work. I checked the IP addresses on the 360 and the laptop and they were the same so it wouldn't work. Then I fixed it and it's all good now :)
